Additel 761-M Automated Pressure Calibrator

Spesifikasi Additel 761-M Automated Pressure Calibrator • Pressure Range Pressure generated by built-in pump and controlled automatically from 90% vacuum to 600 psi ( 40 bar) Pressure measured with external pressure modules ( 160 series) to 10, 000 psi ( 700 bar) Accuracy ( Fully temperature compensated) 0.02% FS • Control Stability ý < 0.005% FS • Contamination prevention system Built-in filter and liquid trap with venting system prevent contamination of the calibrator Solid particles can be blocked by built-in filter A small amount of Liquid can be collected by the built-in liquid trap Both solid particles and liquid can be blown out through the venting system • Automation and Test Program Fully Automated pressure calibration Task preset and auto run Auto step • Easy to Use User friendly interface Intuitive icon driven menu structure • Sourcing and Measuring electrical signals Measure mA or V with 0.01% RD + 0.005% FS accuracy Source/ sink 0 to 22mA current 24 VDC loop power supplied to pressure transmitter during test Automated switch test • Misuse Protection Up to 30V misuse protection on any two sockets • Display 7" LCD color screen ( 800X480) • Documenting and data logging Task management capability Internal memory stores 200 tasks Download tasks and upload results • HART Communication capability Support HART instrumentation • Rechargeable battery: Rechargeable battery with up to 8 hours operation between charges • Leak testing: Apply leak test to an external pressure system to determine the magnitude of pressure variations due to leaks • Pipeline Protection: Special design the pipeline layout to avoid possible blockage and leakage • Portable: Only 12.4 lb • Multi Lingual Interface English, German, French, Italian, Spanish, Portuguese, Simplified Chinese ( Traditional Chinese, Japanese and Russian are available per request) • Control Stability ý < 0.005% FS; • Pressure Connections G1/ 8 Female on calibrator Two 1/ 4NPT( or 1/ 2NPT, 1/ 4BSP, M20× 1.5) female hand-tight connectors on the external pressure manifold ( included) • External Pressure Module Connection External pressure module connector • Electrical Connection 0.156 inch ( Ø 4mm) banana sockets • Documenting and data logging Task management capability Internal memory stores 200 tasks Download tasks and upload results • Display 7" LCD color screen ( 800× 480) Display rate: 5 readings per second • Pressure Units Pa, kPa, MPa, psi, bar, mbar, inH2O 4° C, mmH2O 4° C, inH2O 20° C, mmH2O 20° C, inHg 0° C, mmHg 0° C, kgf/ cm2 • Power Battery: Rechargeable Li-ion Polymer battery ( included) Li-Battery working time: ~ 8 hours Recharge time: ~ 3 hours External Power: 110/ 220V Power adapter ( DC 27 V) ( Included) • Environmental Specification: Operating temperature: 32° F to 122° F ( 0° C to 50° C) Compensated Temperature: 32° F to 122° F ( 0° C to 50° C) Storage temperature: -20° C to 60° C Humidity: < 90% , non-condensing • European Compliance: CE Marked • Communication RS232 ( DB9/ F, environmentally sealed) Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200 Data length: 7 Bits, 8 Bits Stop bit: 1 Bit, 2 Bits Address: from 1 to 121 • Dimension 11.65" X 7.32" X 7.09" ( 296mm X186mm X180mm) • Weight: 12.4 lb